Mountain Series stove regulator with flexible hose and cylinder base. This kit replaces the standard Mountain Series regulator and provides a convenient propane setup.
Mountain Series Flexible Regulator Kit is rated out of 5 by 2.
Rated 3 out of 5 by Happycamper11 from Absolutely must have! With one issue…. Absolutely must have! With one issue… I don’t know why this hose is not shipped with the unit because the design and flexibility are far Superior to the includ arm thing :-). The only negative with this adapter is It’s roughly 1/3 the cost of a new stove.
Date published: 2018-05-09
Rated 5 out of 5 by Rafaelz from Love the flex hose Finally got rid of that disjointed crooked elbow pipe. The flex hose is a huge improvement, especially when hooked with the bulk hose adapter on a 5lb tank.
Date published: 2018-05-02
What adapters do I need to make my Everest camp stove work with my low pressure lp quick connect on the RV.
Hello, Unfortunately you can not hook up the Everest to an RV, there is no adapter that turns the high pressure stove to low pressure
Date published: 2018-03-27
How long is the hose? Will this work with the CC Everest?
Thank you for your question. This hose is about 18" long. It will work with the Everest, as well as any of our red Mountain Series stoves.
Date published: 2018-03-11
Will this work for a Coleman 5430B700 camp stove? I have tried numerous sites and cant find one that fits. The threads are always wrong size.
Unfortunately, We have never tried on the coleman stove so not sure if it will work
Date published: 2018-04-18
Will this work on the ATS-50T stove?
Can I run this from my Everest camp stove and connect it to the hose (same fitting as the 1lb cans) to my 4.25lb tank?
What's the operating pressure of this regulator?
Is the appliance end fine or coarse thread?
Will this work on a Sierra or would there be another one
RELATED BLOG POSTS